4-14 ApexPro™ Telemetry 2001989-203C
Service interfaces
OR
Via the command line utility:
Select Start > Run.
Type cmd and press Enter.
Type c: and press Enter.
Type cd program files\marquette\pts\<version> and press Enter.
NOTE
The active software version of the ATS should replace <version> in
this string.
Type bedduplicator and press Enter.
3. The message Waiting for network communication displays as the Bed
Duplicator starts up. When startup is complete, the available towers are listed in
the Device List.
217A
Bed Duplicator navigation
To view beds admitted to a tower, select the plus sign (+) to the left of the tower.
218A
Tower/bed properties
To view properties information, right-click the bed/tower in the Device List, and
select Properties.
Tower properties
219A
To Next Page
Loading...
Need help?
General
