Chapter 7. Reference
96 | ADTS 405 R/F Mk2 Instruction Manual-English © 2017 General Electric Company – All Rights Reserved.
for setting-up a set of limits similar to the maximum system limits. The system displays an
error message if MAX limits already exist.
7.4.15 CONFIG, [LIMITS], [EDIT LIMITS], [EDIT NEW]
This function is identical to [EDIT EXISTING] and creates a new set of limits. Default values are
taken from “Standard” limits. See [EDIT EXISTING] in Section 7.4.14 for further details.
7.4.16 CONFIG, [LIMITS], [CLEAR LIMITS]
This function clears an existing set of limits. Use [NEXT] or [PREV] to display the name of the
limits. Select [SEL] to clear the limits followed by [YES].
7.4.17 CONFIG, [LIMITS], [LOCK AIRCRAFT]
This function prevents changes to the default limits. If lock is [ON], no changes to the power-
up default aircraft limits can be made from setup.
7.4.18 CONFIG, [LIMITS], [DEFAULT AIRCRAFT]
This function selects the set of limits used at power-up. Use [NEXT] or [PREV] to display the
name of the required limits. Select [SEL].
7.4.19 CONFIG, [MORE], [CONTROL], [CONTROL MODE]
CONFIG equivalent of SETUP function.
7.4.20 CONFIG, [MORE], [DISPLAY/OPTIONS], [DISPLAY TYPE]
CONFIG equivalent of SETUP function.
7.4.21 CONFIG, [MORE], [CONTROL], [CONTROL LOCK]
This function prevents changes to the default CONTROL SETTING. If lock is [ON], no changes
to the control channel selection can be made from setup.
7.4.22 CONFIG, [MORE], [DISPLAY/OPTIONS], [DISPLAY TYPE]
CONFIG equivalent of SETUP function.
7.4.23 CONFIG, [MORE], [DISPLAY/OPTIONS], [OPTIONS]
Refer to the option user manuals.
7.4.24 CONFIG, [MORE], [DATE/FORMAT]
This functions allows the display date format to be selected between [MDY] (mm/dd/yy) and
[DMY] (dd/mm/yy).
To Next Page
Loading...
