Communications Panel Options
© 2017 General Electric Company – All Rights Reserved. ADTS 405 R/F Mk2 Instruction Manual-English | 43
b. Enter the supervisor IP address and select the SSH as the required connection type,
see Figure 4-9.
Figure 4-9: PuTTY Configuration
c. Press “OPEN” and select “YES” to any security warnings.
d. Enter the user name “adts” and the default or current password when prompted.
e.
At the $ prompt, enter command <passwd> followed by
the <RETURN> key.
f. Follow the screen prompts by Enter the existing password followed by the new
password and further confirmation entry. The results of a successful change should
look like the PuTTY window in Figure 4-10.
Figure 4-10: Changing the Default Password
Close the PuTTY window and confirm that a new connection can still be gained using the new
password.
4.13.3 Access ADTS Files
Working with the filing system is best done using a window based FTP client that also
supports SSH, such as Win SCP. The following example sequence shows how access is gained
and what file directories are visible.
To Next Page
Loading...
