GE Giraffe - Page 59

3-17Girae Warmer
Using the observation and procedure lights
Illustration
Step
Description
1
Two observation lights (1) are located in the
heater head on either side of the heater
dish. The observation lights serve as general
illumination of the bed surface and can be
set to the desired light intensity using the
observation light dimmer knob located on
the lower right corner of the control panel.
An aimable procedure light (2) is located just
below the heater head.
The procedure light provides a more intense
spot light to illuminate a precise area during
procedures.
The procedure light can be directed at
any point on the mattress and is activated
using the switch on the light handle (3). The
procedure light is not intended for use during
surgical procedures.
Uninterruptible Power Supply (UPS)
NOTE: The UPS is available only in select markets. To understand availability within your region,
contact your sales representative.
The Girae UPS is a medical grade power supply oering uninterruptible power supply to the
Girae Warmer. The UPS is designed to securely mount to a single Girae Warmer via specic
mounting hardware provided in the Girae UPS kit, or separately in the Shelf Hardware Mounting
Kit. The UPS may serve to benet customers experiencing power line voltage disturbances, or Brown
Outs, or temporary power outages, or Black Outs. Per the UPS Specications, the Girae UPS provides
power to the Girae Warmer in situations where the product is disconnected from a wall receptacle.
For specications and a detailed description of the installation procedure, refer to the Girae UPS
Installation Instructions (provided with the UPS).