GE Healthcare Brivo XR118 - Page 114

GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 114 Section 9.0 - System Configuration
9.12.8 Data Format Editor Instructions
The following are abbreviated instructions for entering a data format.
1.) Scan the Enter Data Format symbol.
2.) Primary/Alternate Format: scan 0 for Primary Format
3.) Terminal Type: scan 099 for any terminal type
4.) Code I.D.: scan 99 for any bar code type
5.) Length: scan 9999 for any length bar code.
6.) Editor commands: use the Programming Chart that follows.
7.) Scan Save to save your entries.
9.12.9 Programming Chart