GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 124 Section 11.0 - AP Assembly Installation
11.2 AP Assembly Installation
Note: Before installing AP Assembly, make sure the proper installation location has been
determined.
There are two ways to mount or place the AP: Wall mounting and Table placement
11.2.1 Wall mount installation
Note: Make sure the lead shielding is not damaged by wall anchors.
1.) Mark the hole locations on the wall according to the layout below.
Wall Anchors
AP
Wall Adapter
Table Adapter
To Next Page
Loading...
