GE Healthcare Brivo XR118 - Page 151

GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Chapter 6 - - Calibration Page 151
10.3 Results
Table 6-2 Results from the Simplified and Additional Tests Sections
GE-IDX-RealTime iPACS Viewer v5.0
Picker
Philips EasyAccess
Neusoft v3.0
Sectra v10.2
Thinking Systems
- - - - -
AMICAS LightView v4.10.196
Category No. Tests Yes / No
Simplified
1 PACS monitors calibrated according to DICOM
2
SMPTE 5% and 95% squares equally visible on PACS?
3
Images 1 and 6 appear visually identical?
4
PACS configured for Burn-on-Send?
Additional Tests
5 DICOM Header on PACS (Image 1 No-Burn)?
WC = / /
WW = / /
VOI-LUT Tags (Yes/No)
6
DICOM Header on PACS (Image 6 Burn-on-Send)?
WC = / /
WW = / /
VOI-LUT Tags (Yes/No)
7
Values Displayed on PACS Viewer (Image 1)?
WC = / /
WW = / /
8
Values Displayed on PACS Viewer (Image 6)?
WC = / /
WW = / /
9
Saturation visible in Lung or Abdomen region?
10
Able to see all five squares in Top Band of Image 6? No
11
Able to see all five squares in Top Band of Image 1?
12
Images 1, 4 and 5 appear visually identical?
13
Images 6, 7 and 8 appear visually identical?
14
PACS able to select Normal/Harder/Softer?
15
DICOM Header on PACS (Image 9 - CR-Fallback)?
VOI-LUT not present; correct WW/WC?