GE Healthcare Brivo XR118 - Page 242

GE HEALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 242 Chapter 10 - - Renewal parts
Portable workstation main board assembly replacement procedure
The device or portions of the device may have power present from the battery even when shut
down, please demount the battery first before this procedure.
1.) Follow the steps of Portable workstation battery replacement procedure on page 236 to
remove the battery from workstation.
2.) Follow the steps Portable workstation SSD drive replacement procedure on page 238 to
remove SSD drive.
3.) Follow the steps Portable workstation RAM replacement procedure on page 240 to remove
RAM.
4.) Demount the screws at the back of the workstation.
5.) Demount the back cover from the workstation.