GE Healthcare Brivo XR118 - Page 260

GE HEALTHCARE
D
IRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 260 Chapter 12 - - Set Preferences
Add or Edit DICOM Printers
Adding and editing printers use very similar process and the same screens shown
in Figure 12-7, Figure 12-8, Figure 12-9 and Figure 12-10. Table 12-3, Table
12-4, Table 12-5 and Table 12-6 describe the fields in detail.
• If Editing an existing printer’s configuration, select the printer from the
DICOM Printers list and click [Edit].
• If adding a new printer, click [Add].
Complete requested information for all tabs and click [Save] to add the printer
or save the changes.
Note: All printers on system must have a printer calibratin performed by service for each
individual printer to assure IQ.
Figure 12-7 Add Printer screen - Printer Tab
Table 12-3 Add Printer screen - Printer Tab description
Function Description
DICOM Printer Label
The name of the printer that appears in the DICOM Printers
list and on the print setup screens.
Note: DICOM printer labels cannot have spaces in the name. Use
underscores ( _ ) to separate words.
Application Entity
Title
Type in DICOM AE.
Network Address The IP address of the printer.
Port Number The port number of the printer.
Pixel Depth The resolution of the printer.