GE HEALTHCARE
DIRECTION 5461425-8EN, REVISION 6 BRIVO XR118 SERVICE MANUAL
Page 68 Section 8.0 - Software Installation
and press the <Enter> key, then the installation starts.
Figure 5-13 System Installation - Step 1
iv.) Be patient, it takes approximately 15 minutes for the system software to load.
v.) After the system software installed successful, the workstation reboots automatically.
vi.) When the boot Menu is displayed again, select “*) Boot from first hard disk” and press the
<Enter> key,
Figure 5-14 System Installation - Step 2
To Next Page
Loading...
