GE LOGIQ S8 User Manual

GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 3-10 - Printer Installation 3 - 65
3-10-4 Setting the printer to print reports
To set up the Off-Line Printer to print reports,
1.) Select Utility -> System -> Peripherals.
2.) Select the printer from Default Printer pull-down menu.
Figure 3-45 Report Printer Setup
3.) Press Save.
4.) Press Print on the Report screen to print the report.
3-10-5 PC printer setup
1.) Turn off the LOGIQ S8.
2.) Connect the PC printer to the LOGIQ S8 (rear USB port).
3.) Turn on the PC printer.
4.) Turn on the LOGIQ S8. The following message appears.
5.) Click OK and shutdown the LOGIQ S8.
6.) Reboot the LOGIQ S8.

GE LOGIQ S8 Specifications

General

Type	Ultrasound System
Display Type	LCD
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Display Size	19 inches
Transducers	Linear, Convex, Phased Array
Doppler Modes	Color Doppler, Power Doppler, Spectral Doppler
Operating Modes	B-Mode, M-Mode
Applications	Abdominal, Cardiac, Obstetrics, Gynecology, Vascular, Musculoskeletal
Portability	Cart-based
Transducer Ports	4