GE LOGIQ S8 User Manual

GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 7-7 - Troubleshooting Trees, Instructions and Tech Tips 7 - 77
7-7-12 Mode encoder works twice when pushed button once
The cause may be improper setting or dust in a cap. Before replacing an encoder, verify the setting/dust
of a cap.
NOTE: It occasionally sounds like a correct setting from a cap when assembled it improperly.
7-7-13 Sticky buttons
The cause may be dust/liquid into a button. Call GE Service.
7-7-14 Mode button failure
Other function works when push a mode button / Mode button fail to respond even if you push a button
Call GE Service.

GE LOGIQ S8 Specifications

General

Type	Ultrasound System
Display Type	LCD
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Display Size	19 inches
Transducers	Linear, Convex, Phased Array
Doppler Modes	Color Doppler, Power Doppler, Spectral Doppler
Operating Modes	B-Mode, M-Mode
Applications	Abdominal, Cardiac, Obstetrics, Gynecology, Vascular, Musculoskeletal
Portability	Cart-based
Transducer Ports	4