GE LOGIQ S8 User Manual

GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
1 - 6 Section 1-2 - Service manual overview
1-2-4 Product description
1-2-4-1 Overview of the LOGIQ S8/LOGIQ E8 ultrasound system
The LOGIQ S8/LOGIQ E8 ultrasound system is a high performance digital ultrasound imaging system
with total data management.
This system provides image generation in B-Mode, Color Doppler, Power Doppler, M-Mode, Color M-
Mode, PW/CW and 3D/4D, Tissue Velocity imaging, Volume-Guided Ultrasound, Elastography, and
Contrast applications.
The fully digital architecture of the LOGIQ S8/LOGIQ E8 allows optimal usage of all scanning modes
and probe types throughout the full spectrum of operating frequencies.
Signal flows from the Probe Connector Panel to the Front End, and then over to the Back End Processor
and finally to the monitor and peripherals.
System configuration is stored on the hard drive in the Back End Processor.
All necessary software is loaded from the hard drive on power up.

GE LOGIQ S8 Specifications

General

Type	Ultrasound System
Display Type	LCD
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Display Size	19 inches
Transducers	Linear, Convex, Phased Array
Doppler Modes	Color Doppler, Power Doppler, Spectral Doppler
Operating Modes	B-Mode, M-Mode
Applications	Abdominal, Cardiac, Obstetrics, Gynecology, Vascular, Musculoskeletal
Portability	Cart-based
Transducer Ports	4