GE LOGIQ S8 User Manual

GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
3 - 20 Section 3-7 - Power On/Off
3-7-3 Login
At login, you are notified that “You are accessing a diagnostic medical device that is provided by
authorized usage only. Data stored on this device may be subject to various regulations including but
not limited to regulations which govern disclosure and privacy of this data. By using this device you are
acknowledging that you are authorized to do so and are trained in appropriate use and regulatory
guidelines.”
Figure 3-12 Login Window (Example of R4.2.5x)
After you have established your password, follow these steps to login.
1.) Type your user name in the Operator field.
2.) Type your password in the Password field.
3.) Press OK to login, or Cancel to cancel login.
NOTICE
The System Administrator manages system groups, users, and permissions. After you have been
added as a valid user, the System Administrator assigns you a temporary password. When you log into
the system for the first time, you will be prompted to change your password.

GE LOGIQ S8 Specifications

General

Type	Ultrasound System
Display Type	LCD
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Display Size	19 inches
Transducers	Linear, Convex, Phased Array
Doppler Modes	Color Doppler, Power Doppler, Spectral Doppler
Operating Modes	B-Mode, M-Mode
Applications	Abdominal, Cardiac, Obstetrics, Gynecology, Vascular, Musculoskeletal
Portability	Cart-based
Transducer Ports	4