GE LOGIQ S8

GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 6-2 - Monitor Adjustment 6 - 7
6-2-1-3 OSD
Figure 6-6 OSD
6-2-1-3-1 Language
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> LANGUAGE by pressing the < LEFT or RIGHT > button to move the cursor and
the MENU (middle) key.
3.) Select English/German/French/Spanish/ Italian/Swedish/Chinese/Japanese by pressing the <
LEFT or RIGHT > button to decrease/increase the value and the MENU (middle) key. (Default :
English)
6-2-1-3-2 H-Position
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> H-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
3.) Adjust the H-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase the value.
(default : 50)
6-2-1-3-3 V-Position
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> V-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
3.) Adjust the V-POSITION by pressing the < LEFT or RIGHT > button to decrease/increase the value.
(default : 50)
6-2-1-3-4 Half Tone
1.) Press the MENU (middle) key of the monitor controls over 10 sec.
2.) Select the OSD -> HALF TONE by pressing the < LEFT or RIGHT > button to decrease/increase
cursor and the MENU (middle) key.
3.) Adjust the HALF TONE by pressing the < LEFT or RIGHT > button to decrease/increase the value.
(default : 50)