GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 7-3 - Gathering Troubleshooting Data (R1 to R4) 7 - 13
7-3-6 Screen captures
To capture screen images that can be used for diagnostic and troubleshooting purposes.
7-3-6-1 Ctrl+PrintScreen Shortcut
A Ctrl+PrintScreen shortcut is available for quickly capturing the image displayed on the system. Images
captured using this shortcut are saved in the d:\export\service\image directory using both the JPEG
(.jpg) and raw DICOM (.dcm) formats.
The InSite connection will have access to the export folder on the “D” drive to retrieve these images.
This feature will allow the customer to quickly and easily acquire images that can then be viewed by the
OLC.
7-3-6-2 To Capture a Screen Image Using the Shortcut
With the desired image displayed on the screen, press Ctrl and PrtSc (print screen) keys
simultaneously.
If you want to compress or delete them:
1.) From the touchpanel, select Utility -> Service -> Utilities -> Common Utilities -> Image Compress &
Delete Utilities.
2.) Select the checkbox for the image(s) you want to save, compress or delete.
3.) Select Compress or Delete Files, whatever function is desired.
A compressed file of the images is stored in d:\export. You may rely on the date and time of the
Ctrl+PrtSc procedure to identify the most recent image recorded. The uncompressed files are
stored in d:\export\service\image.
NOTE: The Export\Service Directory may get deleted if the user clicks on the button Delete Files For
Transfer on the Save As dialog. The Directory MUST BE recreated after it is removed.
To Next Page
Loading...
Need help?
General
