GE LOGIQ S8 User Manual

GE HEALTHCARE
DIRECTION 5394227, 12 LOGIQ S8/LOGIQ E8 SERVICE MANUAL
Section 7-5 - Gathering Troubleshooting Data (R4.2.5x and later) 7 - 45
6.) To export the .etl file to .cab, select File > Save As and then select Save As or Export.
If the network capture was of a wireless connection, Microsoft Message Analyzer creates a .pcap
file that does not have any of the packets and is probably useless.
7.) Use Wireshark or some other third-party network sniffer to examine the .cab file.

GE LOGIQ S8 Specifications

General

Type	Ultrasound System
Display Type	LCD
3D/4D Imaging	Yes
Connectivity	DICOM, USB, Ethernet
Display Size	19 inches
Transducers	Linear, Convex, Phased Array
Doppler Modes	Color Doppler, Power Doppler, Spectral Doppler
Operating Modes	B-Mode, M-Mode
Applications	Abdominal, Cardiac, Obstetrics, Gynecology, Vascular, Musculoskeletal
Portability	Cart-based
Transducer Ports	4