Revision L MAC™ 3500 Resting ECG Analysis System 5-3
2021337-036
Maintenance: Introduction
Introduction
Recommended Maintenance
Regular maintenance, irrespective of usage, is essential to ensure that the equipment
will always be functional when required.
WARNING
Failure on the part of all responsible individuals, hospitals or
institutions, employing the use of this device, to implement the
recommended maintenance schedule may cause equipment failure
and possible health hazards. The manufacturer does not in any
manner, assume the responsibility for performing the
recommended maintenance schedule, unless an Equipment
Maintenance Agreement exists. The sole responsibility rests with
the individuals, hospitals, or institutions utilizing the device.
Required Tools and Supplies
In addition to a standard set of hand tools, you will need the items listed in the table
below.
Table 1. Tools and Supplies
Item Part Number
#10 Torx driver
#6 Torx driver
Phillips screw driver
Leakage current tester MT-1216-02AAMI (for 220V)
MT-1216-01AAMI (for 110V)
Multifunction micro-simulator MARQ 1
Precision dust remover
Lint-free soft cloth TX609
PS2 style keyboard (Japan only)
To Next Page
Loading...
Need help?
General
