GE MM300 - Page 190

7–6 MM300 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
FLEXLOGIC™ OVERVIEW CHAPTER 7: FLEXLOGIC™
Communication trouble operands
Comm Fail Trip............................................ Asserted when a loss of communication is detected.
Comm Fail Alarm ....................................... Asserted when a loss of communication is detected.
Maintenance
Drive Greasing Alarm............................... Asserted when the running hours exceed the alarm level.
Contactor Inspect Alarm ........................ Asserted when the number of starts exceeds the alarm level.
Max Stopped Alarm.................................. Asserted when the stopped hours exceed the alarm level.
Configuration
Relay Not Configured .............................. Asserted when critical settings are not stored.
Reset
Remote Reset Closed............................... Asserted when the Remote Reset input is closed.
Lockout Reset Closed .............................. Asserted when the Lockout Reset input is closed.
Test Switch
Test Switch Closed .................................... Asserted when the Test Switch is closed .