GE MM300 - Product Identification

2–2 MM300 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
MECHANICAL INSTALLATION CHAPTER 2: INSTALLATION
Figure 2-1: MM300 dimensions
Product identification
The product identification label is located on the side panel of the MM300. This label
indicates the product model, serial number, firmware revision, and date of manufacture.
Figure 2-2: MM300 label
6.071”
(154,15 mm)
4.059”
(103,09 mm)
0.565”
(14,35 mm)
5.228”
(132,78 mm)
3.746”
(95,15 mm)
5.550”
(140,97 mm)
853724A1.CDR
PANEL
2.425”
(61.6 mm)
0.525”
(13.3 mm)
853748A1.CDR
Model:
Serial Number:
Firmware:
Mfg. Date: