GE Moisture Target Series 6 User Manual

Chapter 3. Operation and Programming
Moisture Target Series 6 Hygrometer User’s Manual 49
3.5.2a Setting Log Units (cont.)
Use the arrow keys to select the unit to be
represented by #1 and press Enter . The
screen returns to the Units to Log menu.
Note: If the VeriDri probe is being used, FH
replaces MH.
Note: If the ppmv software version was purchased, PPMv, mg/m
3
, g/m
3
,
and kg/m
3
will be available.
To remove a unit, from the Units to Log menu, select Remove and press
Enter . Select the unit to be removed, press Enter , and the unit is
deleted. Press Cancel to return to the Set Log Params menu.
3.5.2b Setting the Log Interval
To set the log interval, from the Set Log
Params menu, select Interval and press
Enter . The following screen appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter to save (or Cancel
to keep the previous value), and return to the
Set Log Params menu.

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English