GE Moisture Target Series 6 User Manual

Chapter 3. Operation and Programming
50 Moisture Target Series 6 Hygrometer User’s Manual
3.5.2c Setting a Field Separator
To designate a mark to separate the log
fields, from the Set Log Params menu select
FieldSep and press Enter . The following
screen appears.
Use the arrow keys to select the mark used to
separate the log fields and press Enter .
The screen returns to the Set Log Params
menu.
3.5.2d Setting Log Status Flags
Note: The flags used to identify the log status are as follows:
To turn log status flags on or off, from the
Set Log Params menu select Flags and press
Enter . The following screen appears.
Use the arrow keys to select OFF or ON and
press Enter . The screen returns to the
Set Log Params menu.
Press Cancel to return to the Logging
Menu.
Range Err No Comm Bad Message No Data Read Err
Over Range No Link Auto Cal No Cal ADC Failure
Under Range Bad CRC No Refs Write Err Cal Error

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English