GE Moisture Target Series 6

Chapter 3. Operation and Programming
Moisture Target Series 6 Hygrometer User’s Manual 61
3.6.4a Selecting the Number of Points
To select the number of points, highlight
Select Num of Points and press Enter .
The following screen appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter to save (or Cancel
to keep the previous value), and return to the
Edit MH/DP Cal menu.
3.6.4b Selecting the Calibration Point
To select the calibration point, highlight
Select Cal Point and press Enter . The
following screen appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter to save (or Cancel
to keep the previous value), and return to the
Edit MH/DP Cal menu.