GE Moisture Target Series 6 User Manual

Chapter 3. Operation and Programming
62 Moisture Target Series 6 Hygrometer User’s Manual
3.6.4c Setting the MH Calibration
To set up the MH calibration, highlight Edit
MH and press Enter . The following
screen appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter to save (or Cancel
to keep the previous value), and return to the
Edit MH/DP Cal menu.
3.6.4d Setting the Dew Point Calibration
To set up the dew point calibration, highlight
Edit DP/°C and press Enter . The
following screen appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press Enter to save (or Cancel
to keep the previous value), and return to the
Edit MH/DP Cal menu.
Press Cancel to return to the Cal Data menu.

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English