Need help?Do you have a question about the GE SIGNA Voyager and is the answer not in the manual?
General| Magnetic Field Strength | 1.5T |
|---|---|
| Gradient Strength | 45 mT/m |
| Slew Rate | 200 T/m/s |
| Patient Bore Size | 70 cm |
| Type | Magnetic Resonance Imaging (MRI) |
| Gradient System | High-performance |
| Patient Table | Comfortable and ergonomic patient table with motorized positioning |
| Coil Technology | AIR Technology |
| Coil Options | Variety of coils available for different anatomies and applications |
| Imaging Capabilities | Advanced imaging capabilities for a wide range of clinical applications |
| Imaging Modes | 2D, 3D, MRA, fMRI |
| RF Channels | Up to 128 channels |
| Patient Weight Capacity | 250 kg (550 lbs) |
| System Length | 173 cm |
Illustrates the three-dimensional area of magnetic field around the magnet.
Explains how moving metal objects can cause magnetic field disturbances.
Lists equipment sensitive to magnetic fields and proximity limits.
Discusses the role and evaluation of magnetic shielding.
Guidelines for installing multiple magnets to prevent interaction.
Specifies required temperature and humidity levels for MR suite rooms.
Specifies coolant requirements for the Integrated Cooling Cabinet (ICC).
Covers general electrical requirements, including MDP installation.
Details specific requirements for the Main Disconnect Panel (MDP).
Provides shipping dimensions and weights for system components.
Lists structural considerations for site evaluation and room planning.
Defines limits for ferrous materials within the static magnetic field.
Details vibration testing and mitigation requirements for the site.
Requirements for magnetic shielding and site evaluation.
Provides acoustic specifications for the Magnet Room environment.
Discusses the purpose and importance of RF shielding for MR operation.
Specifies general requirements for RF shielded rooms.
Specifies minimum shielding effectiveness (SE) for RF rooms.
Details requirements for mounting dock frame anchor bolts.
Outlines reliability requirements for maintaining RF shield integrity.
Specifies dimensions for Magnet Room doors and viewing windows.
Requirements for the Magnet Room floor, including load support and water resistance.
Specifies the Magnet with Enclosure (MAG), including weight and dimensions.
Specifies requirements for the HVAC venting system.
Details requirements for the emergency exhaust vent system.
Warns about cryogenic hazards and outlines customer responsibilities.
Outlines general requirements for cryogenic venting materials inside the room.
Requirements for cryogenic venting materials outside the Magnet Room.
Details construction requirements for the cryogen vent system.
Specifies requirements for the vent exit location and configuration.
Requirements for electrical lines and filters through RF shielding.
Guidelines for vibration measurement procedures and equipment sensitivity.
Methods for testing RF shielding effectiveness and ground isolation.
Defines the test method for measuring RF shielding effectiveness.
Method for measuring RF shielded room ground isolation resistance.
To Next Page
