GE SIGNA Voyager - Chapter 6 System Interconnections; 1 MR System Interconnects Specifications

Chapter 6 System Interconnections
1 MR System Interconnects Specifications
1.1 Component Designator Definitions
GE Healthcare uses Component Designators to identify system components. All subsystem
cabinets and other components are referred to by their component designators in the
Interconnect Data diagrams and tables.
Table 6-1: MR System Component Designators
Component Designator Description
CRY Cryocooler Compressor Cabinet
E01, E02, etc. Emergency Off Buttons
MDP Main Disconnect Panel
MAG Magnet and Enclosure (all magnet enclosure components in Magnet Room)
Modem Modem for Magnet Monitor
MON Magnet Monitor
MRU Magnet Rundown Unit
OW Operator Workstation
PA1 Pneumatic Patient Alert Control Box
PDU Power Distribution Unit (PDU) is a module in the ISC cabinet
ISC Integrated System Cabinet
ICC Integrated Cooling Cabinet
PT Patient Transport Table
DS, DS1 Door Switch
Table 6-2: MR System Options Component Designators
Component Designator
Description
OXY Oxygen Monitor
OM2 Remote Oxygen Sensor Module
MRE Magnetic Resonance Elastography
SIGNA Voyager Pre-Installation
Direction 5680008–1EN, Revision 2
Chapter 6 System Interconnections 129