11.3 MR System Component Shipping Specifications
MR system component shipping dimensions and weight are listed below:
Table 2-16: MR System Component Shipping Specifications
MR Component
W x D x H Weight
Notes
in. mm lbs kg
1.5T LCC RD Magnet 89 x 94 x 93 2252 x 2400 x 2363 See Note 1 Domestic - Tarped International -
crate/pallet
Magnet Accessory Equip‐
ment
48 x 48 x 28 1219 x 1219 x 711 400 182 Crate
VibroAcoustic Damping
Kit
36 x 65 x 12 914 x 1651 x305 575 261 Box on pallet
Cryocooler Compressor 26 x 28 x 42 660 x 711 x 1067 275 125 Pallet with box cover
Enclosure TBD TBD TBD TBD Box on a pallet
Patient Table 104 x 38 x 35 2650 x 960 x 880 901 408.5 Pallet
Integrated System Cabi‐
net (ISC)
64 x 51 x 89 1620 x 1290 x 2250 2,665 1,209 Box
Integrated Cooling Cabi‐
net (ICC)
37 x 44 x 86 932 x 1118 x 2188 1069 485 Box
SPT Phantom Set 34 x 32.5 x
60
864 x 826 x 1524 350 159 On cart casters with box cover
Operator Workspace Cab‐
inet
24 x 35 x 31 600 x 900 x 780 243 110 Wood pallet with cardboard cover
Operator Workspace Dis‐
play
27 x 33 x 27 686 x 838 x 686 125 57 Pallet
Operator Workspace Ta‐
ble
45 x 54 x 37 1143 x 1372 x 940 180 82 Box
Notes: 1. Approximate magnet shipping weight of magnet with cryogens, VRMw Gradient & RF coils, Enclosure parts installed on magnet,
and lifting beams (i.e. minus packaging material): 11,800 lbs (5352 kg). International shipments must add shipping crate/pallet of 2,200 lbs
(998 kg).
SIGNA Voyager Pre-Installation
Direction 5680008–1EN, Revision 2
Chapter 2 General System Level 55
To Next Page
Loading...
