GE Venue 50 - Page 154

General Procedures and Functional Checks
4-26 Venue 50 – Basic Service Manual
5447566-100 English Rev. 7
SD Card Checks
USB Memory Stick Checks
B/W Printer Checks
Table 4-6: SD Card Checks
Step Task to do Expected Result(s)
1. Insert SD card to the SD card socket on top
of the system.
The storage device status icon will display
the SD Card capacity on top of the screen.
2. Press Utility->Connectivity->Dataflow,
configure SD card as D1 or D2.
The SD card icon will be shown on the
Dataflow Button.
3. Press Dataflow Button with SD Card Icon to
store the patient information.
The patient information is stored to the SD
Card.
Table 4-7: USB Memory Stick Checks
Step Task to do Expected Result(s)
1. Connect USB Memory Stick to the USB port
on top of the system or to Docking Station/
Cart.
The storage device status icon will display
the USB Memory Stick capacity on top of
the screen.
2. Press Utility->Connectivity->Dataflow,
configure USB Memory Stick as D1 or D2.
The USB Memory Stick icon will be shown
on the Dataflow Button.
3. Press Dataflow Button with USB Memory
Stick Icon to store the patient information.
The patient information is stored to the USB
Memory Stick.
Table 4-8: B/W Printer Checks
Step Task to do Expected Result(s)
1. Connect Printer to Docking Station/Cart,
then plug power cord into wall outlet. Power
on the printer.
The printer is powered on.
2. Press Utility->Connectivity->Dataflow,
configure Printer as D1 or D2.
The Printer icon will be shown on the
Dataflow Button.
3. Press Dataflow Button with Printer Icon to
print the images.
The images are printed.