GE Venue 50 - Page 155

Functional checks
Venue 50 – Basic Service Manual 4-27
5447566-100 English Rev. 7
Wireless Network Card Checks
Footswitch Checks
Barcode Reader Checks
Table 4-9: Wireless Network Card Checks
Step Task to do Expected Result(s)
1. Connect the wireless network card to the
USB port.
2. Press Utility->Connectivity->Wireless.
3. Connect to the desired wireless network. The wireless network status icon will
display as “Connected” or “Connceting”on
the screen.
Table 4-10: Footswitch Checks
Step Task to do Expected result(s)
1. Connect the footswitch to the USB port.
2. Configure footswitch in Utility->Settings->USB
Accessories.
3. Press the configured pedal of the footswitch. The system will respond as the
configured function for the footswitch.
Table 4-11: Barcode Scanner Checks
Step Task to do Expected result(s)
1. Connect Barcode Scanner to the USB port.
2. Activate Barcode Reader in
Utility->Settings->USB Accessories.
3. Scan barcode. A beep should be heard and the patient
information will be shown on the Home
screen.