GE Healthcare
- 23 -
4D Color Flow
4D Color flow prepare
While in 2D with CFM pressing the 4D button you are heading to the 4D CFM prepare mode.
The small-medium-large will now only affect the size of the tissue, while the user can adjust the
color ROI to his need.
Workflow:
Select small-medium-large in order to adjust the width of the tissue. Then adjust your color ROI, with
full flexibility.
If needed use Multi beat, to increase the frame rate, while the system now still keeps the same size of
tissue and CFM ROI that was selected for Single beat.
Either press Acquire volume
or you may use the Update/Menu button from now on to change from prepare mode to the 4D
image and back.
To Next Page
Loading...
