GE Vivid E9 Series User Manual

GE Healthcare
- 35 -
Stereo Vision
4D Stereo Vision is a display technique that enhances the perception of depth in 3D rendered
images. The feature requires the use of stereo glasses (delivered with the Vivid E 9). Normally
you should be able to see the stereoscopic effect after a few seconds. If you already wearing
glasses or lenses you should not take them off, since the stereo effect then may be greatly
reduced.
Stereo Vision can be used during live scanning or from an acquired raw data set to get a better
perception of depth.
Vivid E9 touch panel Page 2 EchoPAC
NOTE
For more information please refer to the user manual and/or reference manual.

GE Vivid E9 Series Specifications

General

Display	High-resolution LCD
Power Requirements	100-240 VAC, 50/60 Hz
Application	Vascular
Monitor Size	19-inch
Transducers	phased array, convex, linear
Doppler Modes	Color Doppler, PW Doppler, CW Doppler
3D/4D Imaging	Yes
Beamformer	Advanced beamformer
Operating Modes	B-Mode, M-Mode, Color Doppler, PW Doppler, CW Doppler, TDI, 3D/4D
Advanced Imaging Options	Speckle Reduction Imaging
Connectivity	DICOM, USB, Ethernet
Dimensions	Varies depending on configuration
Weight	Varies by configuration
Portability	Cart-based system