Using Vscan Extend Apps
Vscan Extend – User Manual 5-53
5721203-100 Rev. D
Using Bladder Volume (continued)
NOTE: The image is saved with the measurement values and volume
embedded on it.
View the saved images from the gallery.
NOTE: The Bladder app cannot be used on stored images in the gallery.
NOTE: If a sagittal image is acquired first and the step needs to be
changed to sagittal, press the Sagittal toggle button.
Figure 5-53. Toggle button
Exiting Bladder Volume
1. Press Close to exit the Bladder Volume App.
Figure 5-54. Exit Bladder Volume App
A pop-up displays for confirmation.
2. Press Quit to exit the Bladder Volume app.
3. Press Cancel to continue using the Bladder Volume app.
1. Close 2. Quit
To Next Page
Loading...
