GE Xcellerex XDM Series - Page 104

DescriptionDisplay/ButtonPart
User-defined CV (controlled variable) value
for pH PID controller output.
Note:
In Manual mode, this value is used as
PHC_125 pH CV.
PHC_125 Manual CV
1
4
Toggle button to select the pH probe.AIT_121/AIT_1225
Toggle button to select the control mode.Auto/Manual6
Button to open the Prime Pumps screen. See
Prime the pump, on page 212.
PUMPS SETUP7
Button to open the pH PID Settings screen.
See pH PID Settings screen, on page 105.
PID SETTINGS8
Pump speed displays (controlled variable, CV)
for the acid pump and the base pump. Shown
in % of total pump speed range.
P-201 / SC_201 Acid PID CV
P-202 / SC_202 Base PID CV
9
1
Only shown in Manual mode.
104 Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
4 User interface
4.4 Detail screens
4.4.4 pH screens