ActionStep
Loosen the bottom nut using the wrench. Turn the nut all the way down (the
distance between the support plate and the bottom nut must be at least 2
to 3 mm).
3
Repeat steps 1 to 3 for all four jacking bolts installed on the mixer.4
Result: The jacking bolts are disengaged. The load cells support the mixer
vessel.
136 Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
6 Preparation
6.2 Stabilize the mixer vessel
6.2.1 Use jacking bolts
To Next Page
Loading...
