Disengage jacking bolts
WARNING
Keep jacking bolts. Do not remove jacking bolts from the installed
system.
Follow the instructions below to disengage the jacking bolts.
ActionStep
Turn up the securing nut (1) on the bolt by a few turns using a wrench.1
Turn up the top nut (2) on the bolt by 1 to 2 turns using the wrench.2
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD 135
6 Preparation
6.2 Stabilize the mixer vessel
6.2.1 Use jacking bolts
To Next Page
Loading...
