ActionStep
The following illustration shows a compressed probe sheath assembly in
place.
Repeat steps 1 to 11 above to connect the next probe.12
Collect all loose probe cables and place the cables into the cable holders on
the short side of the mixer vessel.
13
Clamp off any unused probe port connections.14
178 Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
6 Preparation
6.4 Prepare and install the probes
6.4.4 Insert probes into the disposable bag
To Next Page
Loading...
