GEA T-smart 7 User Manual

6.6.4 Actuator without Control Top 32
6.7 Electrical connections 32
6.7.1 Electrical connection with T.VIS control top 33
6.7.2 Adjusting the proximity switch – actuator without T.VIS 33
7 Start-up
35
7.1 Safety instructions
35
7.2 Notes on commissioning 35
8 Operation and control
36
8.1 Safety instructions
36
9 Cleaning
37
9.1 Cleaning
37
9.1.1 Cleaning Process Examples 37
9.1.2 Cleaning effect 37
9.1.3 Rinsing operations 38
9.2 Passivation 38
10 Maintenance
39
10.1 Safety instructions
39
10.2 Inspections 40
10.2.1 Pneumatic connections 40
10.2.2 Electrical connections 40
10.2.3 Mechanical Connections 40
10.3 Maintenance intervals 41
10.4 Prior to disassembly 41
10.5 Disassembling the Valve 41
10.5.1 Removing the T.VIS M-15 Control Top 42
10.5.2 Removing control top type T.VIS P-15 and A-15 43
10.5.3 Removing the proximity switch – actuator without T.VIS 44
10.5.4 Intermediate flange design type VV – removing the valve 44
10.5.5 Disconnecting the actuator 44
10.5.6 Dismantling the Actuator Parts 45
10.5.7 Removing the manual actuator H 46
10.5.8 Removing the Valve Disk Seal 46
10.6 Maintenance 49
10.6.1 Cleaning the Valve 49
10.6.2 Lubricating Seals and Threads 50
10.7 Installation 51
10.7.1 Assembling the Valve Disk 51
10.7.2 Torques for the Clamps and Clamp Connections 52
11 Alarms
53
11.1 Malfunctions and remedies
53
12 Decommissioning
54
12.1 Safety instructions
54
12.2 Disposal 54
12.2.1 General notes 54
12.2.2 Valve Actuator Disposal 54
13 Parts list - Manual actuator for butterfly valve T-smart 7
55
14 Spare parts list - Pneumatic actuator 57
15 Parts list - Butterfly valve body T-smart 7 61
16 Parts list - Butterfly valve 788 77
17 Dimension sheet - T-smart 7 83
18 Dimension sheet - Butterfly valve T-smart 7 VV 88
19 Dimension sheet - Butterfly valve T-smart 7 - flanges 91
20 Appendix 94
20.1 Lists
94
20.1.1 Abbreviations and terms 94
430BAL009990EN_2
4 30.01.2018

GEA T-smart 7 Specifications

General

Brand	GEA
Model	T-smart 7
Category	Control Unit
Language	English