EasyManuals Logo

Geeetech Prusa I3 pro W Building Instruction

Geeetech Prusa I3 pro W
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
3
www.geeetech.com
Shenzhen GETECH CO.,LTD
Preparations
1. Unpack the kit and check if all parts are in the box and check the condition of
each part, there might be some damage during shipping. To help you with this,
there is BOM in the box and each bag was labeled with part number.
2. Contact our customer service immediately by email or through the website if you
find any missing or damaged parts. And on the bottom of the BOM, there is a
signature of reviewer, please take a picture of it and attach the picture in your
mail.
3. Before you start, you can put all the part in order to save your time especially
those screws and nuts. Do not mix them up.
4. Ensure you have the necessary skills to carry out the work, or enlist the help of
someone who does.
5. Work on a big firm table or bench in a clean dry well-lit area.
6. This kit contains tiny parts; please keep them away from kids under 3.
7. Ask for help if you run into any problems - our contact details are on the website
and we will always do our best to resolve any problems encountered.
8. Watch the building instruction videos here on YouTube:
https://www.youtube.com/playlist?list=PLODCkot3GrigDNAiILi4PDbKfZE41VtgG
Read through each chapter of these instructions to gain an
over-all idea of what is involved and how long it might take,
before starting on the work described.

Other manuals for Geeetech Prusa I3 pro W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Geeetech Prusa I3 pro W and is the answer not in the manual?

Geeetech Prusa I3 pro W Specifications

General IconGeneral
BrandGeeetech
ModelPrusa I3 pro W
Category3D Printers
LanguageEnglish

Related product manuals