Geeetech Prusa I3 pro W Building Instruction

6
www.geeetech.com
Shenzhen GETECH CO.,LTD
2 Assemble the rods of a Y axis
Step1. Assemble the 2 threaded rods.
Picture Part ID Required quantity Required parts
NO.5 2 φ10 threaded rod
NO.W14 2
Y axis connect
plate
NO.17 6 Spring washer
NO.8 8 M10 Washer
NO.12 8 M10 Nut
Thread the nuts and washers into the two M10 threaded rods separately. The order
should be:
1) Thread the Y axis connect plate W14 in the middle.
2) Thread the M10 washer > M10 spring washer >M10 nut > M10 nut > M10 washer
on the left
3)（right）Thread the M10 washer < M10 spring washer < M10 nut < M10 nut< M10
spring washer < M10 washer on the right

Geeetech Prusa I3 pro W Specifications

General

Brand	Geeetech
Model	Prusa I3 pro W
Category	3D Printers
Language	English