Geeetech Prusa I3 pro W Building Instruction

43
www.geeetech.com
Shenzhen GETECH CO.,LTD
Mount the endstop on the Z -axis motor base (left) with M2.5 x 16mm screw,M2.5
washer and M2.5 hex nut.
14 Mount the 2 Z motors
Picture Part ID Required quantity Required parts

Geeetech Prusa I3 pro W Specifications

General

Brand	Geeetech
Model	Prusa I3 pro W
Category	3D Printers
Language	English