50
4.4.16. Out3 - Type of output 3
Acronym Scrolling message Submenu Attributes
Out3 OUTPUT TYPE INFO R
If present, the parameter indicates that output 3 is available on the controller and specifies the type.
Unit of measurement: -
Options: RELAY = Relay output
TRIAC = Triac output (only for 650 model)
4.4.17. Out4 - Type of output 4
Acronym Scrolling message Submenu Attributes
Out4 OUTPUT TYPE INFO R
If present, the parameter indicates that output 4 is available on the controller and specifies the type.
Unit of measurement: -
Options: RELAY = Relay output
TRIAC = Triac output (only for 1250 and 1350 models)
4.4.18. OUT1.S - Number of switchings output 1
Acronym Scrolling message Submenu Attributes
OUT1.S NUMBER X 1000 RELAY CYCLES INFO R
If output 1 is relay or logic, the parameter shows the number of switchings (in thousands).
Unit of measurement: Number (× 1000)
Options: -
4.4.19. OUT2.S - Number of switchings output 2
Acronym Scrolling message Submenu Attributes
OUT2.S NUMBER X 1000 RELAY CYCLES INFO R
If output 2 is available on the controller, and if it is relay or logic, the parameter shows the number of switchings (in thou-
sands).
Unit of measurement: Number (× 1000)
Options: -
4.4.20. OUT3.S - Number of switchings output 3
Acronym Scrolling message Submenu Attributes
OUT3.S NUMBER X 1000 RELAY CYCLES INFO R
If output 3 is available on the controller, the parameter shows the number of switchings (in thousands).
Unit of measurement: Number (× 1000)
Options: -
4. CONFIGURATION
To Next Page
Loading...
