106 AFE200 • Instruction Manual
13 - FUNCTIONS
13.1 -
Reserved for AFE200-PV.
13.2 - FUNCTIONS/DOUBLE PAR SET
Two independent sets of parameters can be stored in the AFE200 drive. These can be selected via
the keypad or by using an external command.
This makes it possible to change all the drive parameters quickly and automatically according to the
various operating requirements.
Menu PAR Description UM Type FB BIT Def Min Max Acc
13.2.1 3300 Par set enable ENUM Disable 0 1 ERW
Enabling of management of two parameter sets
0 Disable
1 Enable
When set to 0 only one parameter set is managed (the one used as the default set).
If set to 1 two separate parameter sets can be congured. These can be selected us-
ing a command signal on a digital input of the terminal strip.
Menu PAR Description UM Type FB BIT Def Min Max Acc
13.2.2 3302 Par set select src LINK 16 6000 0 16384 ERWZ
L�DIGSEL2
Selection of the origin (source) of the signal to be used to select the parameter set to
be used. The terminal or digital command that can be associated with this function
can be selected from among those available in the “L_DIGSEL2” selection list.
To Next Page
Loading...