gefran AFE200 Series

108 AFE200 • Instruction Manual
13.3 - FUNCTIONS/COMPARE
This function allows the comparison among two signals or values.
Menu PAR Description UM Type FB BIT Def Min Max Acc
13.3.1 3650 Dig compare input 1 perc FLOAT 32 0.0 -100.0 100.0 ERW
Setting of the digital value of the rst element of comparison.
Menu PAR Description UM Type FB BIT Def Min Max Acc
13.3.2 3652 Dig compare input 2 perc FLOAT 32 0.0 -100.0 100.0 ERW
Setting of the digital value of the second element of comparison.
Menu PAR Description UM Type FB BIT Def Min Max Acc
13.3.3 3660 Compare input 1 src LINK 32 3650 0 16384 ERW
L�CMP
Selection of the origin (source) of the signal to be used as the rst term of comparison.
The values that can be selected in the compare function are listed in the “L_CMP”
selection list.
Menu PAR Description UM Type FB BIT Def Min Max Acc
13.3.4 3662 Compare input 2 src LINK 32 3652 0 16384 ERW
L�CMP
Selection of the origin (source) of the signal to be used as the second term of compari-
son. The values that can be selected in the compare function are listed in the “L_CMP”
selection list.
Menu PAR Description UM Type FB BIT Def Min Max Acc
13.3.5 3670 Compare function ENUM None 0 8 ERW
Setting of the compare function between Compare input 2 and Compare input 1 to
enable Cmp output.
0 None
1 Ingr1=Ingr2