gefran AFE200 Series

110 AFE200 • Instruction Manual
13.4 - FUNCTIONS/PADS
The general variables are used to exchange data between the various components of a Bus system.
They are similar to the variables of a PLC. The basic structure of the system is illustrated below. Pads
can be used, for example, to send information from a eldbus to an optional card. All Pads can be read
and written.
PAD 1
0
PAD 2
0
PAD 3
0
PAD 4
0
PAD 5
0
PAD 6
0
PAD 7
0
PAD 8
0
PAD 9
0
PAD 10
0
PAD 11
0
PAD 12
0
PAD 13
0
PAD 14
0
PAD 15
0
PAD 16
0
ANALOG
OUTPUTS
DIGITA L
OUTPUTS
Options (Bus Interface ...)
INTERBUS S, PROFIBUS DP, etc.
KeypadRS 485
Menu PAR Description UM Type FB BIT Def Min Max Acc
13.4.1 3700 Pad 1 INT32 32 0 0 0 ERW
13.4.2 3702 Pad 2 INT32 32 0 0 0 ERW
13.4.3 3704 Pad 3 INT32 32 0 0 0 ERW
13.4.4 3706 Pad 4 INT32 32 0 0 0 ERW
13.4.5 3708 Pad 5 INT32 32 0 0 0 ERW
13.4.6 3710 Pad 6 INT32 32 0 0 0 ERW
13.4.7 3712 Pad 7 INT32 32 0 0 0 ERW
13.4.8 3714 Pad 8 INT32 32 0 0 0 ERW
13.4.9 3716 Pad 9 INT32 32 0 0 0 ERW
13.4.10 3718 Pad 10 INT32 32 0 0 0 ERW
13.4.11 3720 Pad 11 INT32 32 0 0 0 ERW
13.4.12 3722 Pad 12 INT32 32 0 0 0 ERW
13.4.13 3724 Pad 13 INT32 32 0 0 0 ERW
13.4.14 3726 Pad 14 INT32 32 0 0 0 ERW
13.4.15 3728 Pad 15 INT32 32 0 0 0 ERW
13.4.16 3730 Pad 16 INT32 32 0 0 0 ERW
Setting of general, 32 Bit variables. PAD parameters can be used as supporting
parameters to send values written by the eldbus, serial line, etc. to analog or digital
outputs.