AFE200 • Instruction Manual 129
16 - ALARM LOG
This is the menu in which the log of previous alarms is saved, with the time the alarm occurred (in
relation to the Time drive power on parameter).
The alarms are displayed starting from the most recent (No. 1) up to the furthest back in time (No. 30).
Up to 30 alarm signals can be displayed. The sub-code is used by service technicians to identify the
specic type of alarm.
Press the ▲ and ▼ keys to scroll the screen pages of the alarm log. The alarm log cannot be deleted.
3 Ground fault
4 Overcurrent
110:20 0000H
109:25 0000H
T+ T- EN LOC Ilim n=0 AL
1 Overvoltage
2 Undervoltage
110:32 0000H
110:25 0000H
T+ T- EN LOC Ilim n=0 AL
Alarm description
Sub-code
Alarm number
Time alarm
occurred
To Next Page
Loading...