gefran AFE200 Series

AFE200 • Instruction Manual 133
This signal is activated when the alarm congured in parameter 4704 alarm dig sel 3
is active.
Menu PAR Description UM Type FB BIT Def Min Max Acc
- 4714 Alm dig out mon 4 BIT 16BIT 0 0 1 ER
This signal is activated when the alarm congured in parameter 4706 alarm dig sel 4
is active.
Menu PAR Description UM Type FB BIT Def Min Max Acc
- 4770 First alarm UINT32 16BIT 0 0 0 ERW
This parameter displays the rst alarm to be activated.
0 No alarm
1 Overvoltage
2 Undervoltage
3 Ground fault
4 Overcurrent
5 Desaturation
6 MultiUndervolt
7 MultiOvercurr
8 MultiDesat
9 Heatsink OT
10 HeatsinkS OTUT
11 Intakeair OT
12 Motor OT
13 Drive overload
14 Motor overload
15 Bres overload
16 Phaseloss
17 Opt Bus fault
18 Opt 1 IO fault
19 Opt 2 IO fault
20 Opt Enc fault
21 External fault
22 Speed fbk loss
23 Overspeed
24 Speed ref loss
25 Emg stop alarm
26 Power down
27 Not Used1
28 Not Used2
29 Not Used3
30 Not Used4
31 Not Used5
32 Not Used6
33 Plc1 fault
34 Plc2 fault
35 Plc3 fault
36 Plc4 fault
37 Plc5 fault
38 Plc6 fault
39 Plc7 fault
40 Plc8 fault
Menu PAR Description UM Type FB BIT Def Min Max Acc
- 4780 Alarm PLC UINT16 0 0 0 ER
This parameter displays the state of the alarms generated by the application written