gefran SIEIDrive ADL300 Quick Start Up Guide, Specification And Installation

80 ADL300 • Quick installation guide - Specifications and connection
8.3.15 Asynchronous/Synchronous selection
• To switch from Asynchronous to Synchronous:
Menu 4 - DRIVE CONFIG, PAR 6100 Load synch control
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
05 LIFT
 
04 DRIVE CONFIG
19/19 PAR: 6100
Load synch control
Press E to execute
E
Load synch control?
Press E to exe
c
ute
E
Press E to reset the drive and restart in the new operating mode.
Note ! Important: the default parameters including the LIFT application are reloaded.
This can only be done with the drive disabled.
• To switch from Synchronous to Asynchronous:
Menu 4 - DRIVE CONFIG, PAR 6100 Load synch control
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
05 LIFT
 
04 DRIVE CONFIG
19/19 PAR: 6100
Load synch control
Press E to execute
E
Load synch control?
Press E to exe
c
ute
E
Press E to reset the drive and restart in the new operating mode.
Note ! Important: the default parameters including the LIFT application are reloaded.
This can only be done with the drive disabled.

gefran SIEIDrive ADL300 Specifications

General

Brand	gefran
Model	SIEIDrive ADL300
Category	Inverter
Language	English