58 AGy -L
English
Sizes from 4185 to 82000
c
a
D1
b
D1
D2 D2
D3 D3 D3 D3
D4
Montaggio a muro
Mounting wall (D)
Weight
a b c D1 D2 D3 D4 Ø kg (Ibs)
4185
4221
4301 22 (48.59)
4371 22.2 (48.9)
5450
5550
6750 741 (29.2) 725 (28.5) 59 (130)
7900 75.4 (166.1)
71100 80.2 (176.7)
71320 86.5 (190.6)
81600
82000
dim2-g
442 (17.4) 947 (37.3) 109 (240.3)
M6
891 (35)
509 (20)
297.5 (11.7)
- - 100 (3.9)
909 (35.8)
965 (38)
Type
Dimensions: mm (inch)
475 (18.7)309 (12.1) 489 (19.2)
268 (10.5)
225 (8.8)
18 (39.6)
308 (12.1)
376 (14.7) 564 (22.2) - 150 (5.9) 550 (21.6) 34 (74.9)
-
-
Mounting Clearance
The Drives must be mounted in such a way that the free flow of air is ensured.
The clearance to the device must be at least 150 mm (6 inches).
A space of at least 50 mm (2 inches) must be ensured at the front.
On sizes 81600 and 82000 the top and bottom clearance must be at least 380 mm (15 inches), on front and sides must be
ensured a space of at least 140 mm (5.5 inches).
Devices that generate a large amount of heat must not be mounted in the direct vicinity of the frequency inverter.
Fastening screws should be re-tightened after a few days of operation.
³
³³ ³³³
10 mm ( 0.4" )
[140mm (5.5")]
150mm(6")
[380mm (15")]
50mm(2")
[140mm (5.5)]
20 mm ( 0.8" )
[140mm (5.5")]
150 mm ( )6"
[380mm (15")]
10 mm ( 0.4" )
[140mm (5.5")]
[...] for 81600-82000 sizes
To Next Page
Loading...
