gefran SIEIDrive LIFT AGy -L

English
66 AGy -L
5.2 Language selection
Nota!
Available on optional keypad KBG-LCD-... only.
1 - Switch-on the drive
2 - Press the Prg key for about 5 sec., the display will show:
Drv 03.03.00.00
Keypad V3.000
3 - Press the  the display will show:
Language:
English
4 - To select a new language, press  or 
5 - Press the E key to confirm.
5.3 Moving through the drive main menu
Soon after, the keypad display will show d.000 Output frequency parameter of DISPLAY menu.
DISPLAY d000
--------------
Output frequency
0.0 Hz
STARTUP S000
--------------
INTERFACE I000
--------------
FREQ & RAMP F000
--------------
PARAMETER P000
--------------
APPLICATION A000
--------------
COMMAND C000
--------------
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Prg
d.000
S.000
I.000
F.000
P.000
A.000
C.000
KBG-1 (standard)
KBG-LCD-.. (Optional)
Menu of read-only parameters (display)
Menu of input/output drive settings
(digital/analog)
Menu of multi frequencies and ramps settings
Menu of read/write drive parameters
Menu of PID function settings
Menu of control-type parameters
(Save, Load default, etc.)
Menu of basic drive start up parameters
0.00