Flag 13
Enter 0 or 1 for each bit (N1 to N8), and press
ENTER
each time to fix your decision.
Bit#: Options: Function:
N1
0Print the subtotal amount of the released transaction when the HOLD is released by operation.
1 Print the details of the released transaction when the HOLD is released by operation.
N2
0Always enter "0."
N3
0Always enter "0."
N4
0Always enter "0."
N5
0 Print the training information on the receipt.
1Do not print the training information on the receipt.
N6
0 Print the word of "TRAINING" on the receipt while in the operator training mode.
1 Do not print the word of "TRAINING" on the receipt while in the operator training mode.
N7
0
Always enter "0."
N8
0 Do not count the training operations as transaction numbers.
1 Count the training operations as transaction numbers.
To move to next Flag, just press
PAGE UP
. If you wish to skip to Flag 23 directly, enter 23
and
DSGN
.
To return to PROGRAM 2 MENU, just press
ESC
.
Flag 14
Enter 0 or 1 for each bit (N1 to N8), and press
ENTER
each time to fix your decision.
Bit#: Options: Function:
N1
0 In registration, when an un-programmed bar-code item is input, and after 'PRICE' is seen in
the display, the bar-code will be programmed by entering its price and the link department.
(
Note
: If the bar-code item is found to be un-programmed after scanning, and the registration
is to be canceled, press and .)
1 In registration, when an un-programmed bar-code item is input, an error occurs.
N2
0 The symbol of # is not printed.
1 The symbol of # is printed in the front of barcode number string
N3
0 Barcode number string is not printed.
1 Barcode number string is printed in the previous line of PLU printed.
N4
0 Barcode number string is not printed.
1 Barcode number string is printed in the following line of PLU printed.
N5
0Always enter "0."
N6
0Always enter "0."
N7
0 Print the counter of each media key( CASH, CHECK, CARD, CHARGE) on the full report and
clerk report.
1 Do not print the counter of each media key on the full report.
N8
0Print the counter of net sale on the full report and clerk report.
1 Do not print the counter of net sale on the full report and clerk report.
To move to next Flag, just press
PAGE UP
. If you wish to skip to Flag 23 directly, enter 23
and
DSGN
.
To return to PROGRAM 2 MENU, just press
ESC
.
CLEAR
ENT RLS
5. P2 programming
33
1
2
3
4
5
6
7
8
9
10
11
12
To Next Page
Loading...
